 |
Graflex.org Get help with your Graflex questions here |
| Pacemaker/Anniversary parts interchange | |
| Author | Message |
|---|---|
| AnselMortensen Joined: 30 Dec 2019 Posts: 18 |  Posted: Tue Dec 31, 2019 5:27 pm Post subject: Pacemaker/Anniversary parts interchangeHi, I have a Pacemaker Speed 4x5 carcass, with a working FPS. It is missing the bellows and whole front standard assembly. It is in very nice cosmetic shape, and I would like to make a user out of it, if possible. I really like the larger 4" square lens boards of the Anny, and the movable, folding infinity stops of the Pacemaker. Is there a way to adapt an Anny front standard /lens board holder for use on a Pacemaker bellows/rail? If so, what parts will I need? Any advice appreciated. Thanks! |
| 45PSS Joined: 28 Sep 2001 Posts: 4081 | Posted: Tue Dec 31, 2019 11:25 pm I don't have any experience with this. Somewhere on this site, and likely in this section, are some tips on this. The Anniversary has a fixed rail (yoke in graflex speak) in the body and I don't think an Anniversary front standard will fit onto Pacemaker rails. I think someone has retrofitted a Pacemaker rails, front standard, bellows to an Anniversary body. That said, these may help you: https://graflex.org/manuals/4x5-Anniversary-Speed-Graphic.pdf https://graflex.org/manuals/45-Pacemaker-Speed-and-Crown-Graphic.pdf https://www.cameramanuals.org/prof_pdf/c-3_graflex_camera.pdf The C-3 is the military version of the Anniversary Speed. |
| William Hallett Joined: 07 Jan 2012 Posts: 103 | Posted: Wed Jan 01, 2020 2:27 pm The rails have the same cross-section, and the Anni front standard fits on the Pacemaker rails (I've just tried it). However, the means by which the bellows are attached are quite different. The "yoke" on both cameras appears to be identical (including a linked moving section in the body) except that there are additional grooves milled in the Pacemaker yoke for the infinity stops. The Pacemaker yoke fits in the bed rails of the Anni. |
| AnselMortensen Joined: 30 Dec 2019 Posts: 18 | Posted: Thu Jan 02, 2020 1:53 am Thanks to both of you kind gents for the great information! I will do some scouting around to see what I can find parts-wise. Cheers! |
| AnselMortensen Joined: 30 Dec 2019 Posts: 18 | Posted: Tue Jan 21, 2020 5:10 am An update: After collecting parts, I found it easiest to install a Pacemaker front standard, bellows and yoke. So, I have a mostly-stock Pacemaker SG. It seems that the most practical way for me to use my Anny lens boards would be to make a tophat-style lens board adapter. I have seen adapters to use PM lensboards on an Anny, but not vice-versa, so I guess I still have a project on my hands.  |
| jerryg Joined: 04 Apr 2017 Posts: 74 | Posted: Mon Jan 27, 2020 1:49 am iu did just the opposite of your original question. I swapped the anni front standard with a pacemaker style front standard so I have a little tilt with my aero ektar lens I did have to do some shaving down of the inner pacemaker plate so it would fit inside the anni bellows. with that in mind I think it would be easier to do the opposite swaping |
| All times are GMT |