Does anyone have a tip as to how to go about turning a GRAFLEX SUPER B RB, that currently uses 3x 4(1/4) film to a 4 x 5 film holder?!~
Thanks everyone~!

Here's someone who does it:

http://www.globalmatter-lab.net/Convert%20R%20B%20Graflex%20with%204x5%20Grafloc%20Back.htm

Might be a tad tricky to try yourself.

Cheers,
Bruce

Thank you very much!~I will look into it! Definitely something for experienced hands.
Sincerely
Ken ...a Wanna Be Graflex person!~

Not cheap, but you'll end up with a far more user friendly camera!

Cheers,
Bruce

Bruce~
Have you used/owned one and, are they as wonderful as they appear? I missed one, online!~ It was the Dorothea Lange camera!~
Ken

Hi Ken,

No I haven't used my one yet. The shutter fabric needs replacing so it's one of those project I'll get around to....!! Nice to look at though.

Others on these boards love their Graflex SLRs so one might be kind enough to offer some experiences.

If your camera has a Graflex back (just the slides at top and bottom) you might find a 120 roll film back with a 3x4 mounting plate on eBay. Once again someone might confirm that this will work.

A Dorothea Lange camera would have been a great win!

Cheers,
Bruce

I recently purchased 3x4 Super D. Took it out to the park.

http://s668.photobucket.com/albums/vv47/mopar_guy/?action=view&current=Graflex34_4.jpg

I took this shot with some T-max 100 and printed on some outdated paper. Scanned at 300dpi. The neg was underexposed and my processing was not the best. The camera was filthy when I got it but I cleaned it up and the 152mm Ektar is all scratched up. I got four shots and this was probably the first time that the camera had been used in over 30 years. I had so much fun that I bought a second camera just like it.

Regards,
Dave

Wow~ Thank you!~ It must have been a blast knowing the history of the camera, as it took its first photo in many years!~
As I understand it, they were best used for portraits. Although I'm a bit of a bridge generation,( film and digital) there is simply a romance that oozes out of these cameras, AND.....film!~

Ken,

Using a 3 1/4 x 4 1/4 Graflex Super D is simple if you want to use roll film. Graflex made rollholders to fit Graflex back cameras. I own one for 2x2 and another for 2x3 so I can use 120 rollfilm if I want. I also have five sheet film holders. I simply buy 8x10 film and cut it down. I went to Office Depot and got myself one of those guillotine style paper cutters and set it up with a 3-position stop made out of a piece of 1x4 lumber. I can cut 4 1/4 inch, 3 1/4 inch and 2 1/4 inch in total darkness with this setup. Total cost was about $70.

Using the Super D is kind of a personal project. I took the photos at Camano Island State Park back at the end of February and I haven't had a chance to try the camera again yet because I haven't had the time.

Regards,
Dave

When looking for a 3x4 rollfilm back, be sure it was made for a Graflex SLR. The right kind has a groove running 5/8 inch from one side to fit the raised light trap on the camera body. The ones for the Graphics have ridges instead of a groove and will not fit.
It's well worth looking for a rollfilm back. I have an 8-exposure back for my 3x4 RB which has a 6-3/8" lens. This makes it a wonderful portrait camera -- the lens on a 6x9cm frame is roughly equivalent to an 80mm on the 35mm format.

I must say that it does me well, to learn of OTHER passionate "4 x 5-ers" out there!!!! ( Shoulde that be our new moniker: "A 4 x 5-ER""
I shall look into that, as there are many more 3 x4's avail
able~ Has anyone tried to make a 6 x 12? (panaramic?!)
Ken
thanks, everyone!~