| View previous topic :: View next topic |
| Author |
Message |
primus96
Joined: 13 Nov 2003
Posts: 225
Location: Yorkshire, United Kingdom
|
 Posted: Wed Feb 18, 2004 10:16 am Post subject: |
 |
|
I have acquired a Schneider Xenar 150/4.5
in a Synchro Compur #1 shutter.
The trigger the shutter by the body release there is a little tag attached to a rod at the side of the front standard.
If you have a Pacemaker Graphic you might understand what I mean.
Can you use it as is by adjusting the tag & rotating the lens?
I would also like a viewfinder mask for the lens. Its a 150mm, what's that in Imperial?
I think I need viewfinder mask #9.
Are they impossible to get? |
|
| Back to top |
|
 |
Dan Fromm
Joined: 14 May 2001
Posts: 2159
Location: New Jersey
|
| Posted: Wed Feb 18, 2004 12:23 pm Post subject: |
|
|
| Quote: |
On 2004-02-18 02:16, primus96 wrote:
I have acquired a Schneider Xenar 150/4.5
in a Synchro Compur #1 shutter.
The trigger the shutter by the body release there is a little tag attached to a rod at the side of the front standard.
If you have a Pacemaker Graphic you might understand what I mean.
Can you use it as is by adjusting the tag & rotating the lens?
I would also like a viewfinder mask for the lens. Its a 150mm, what's that in Imperial?
I think I need viewfinder mask #9.
Are they impossible to get?
|
yes, 6", no |
|
| Back to top |
|
|
glennfromwy
Joined: 29 Nov 2001
Posts: 903
Location: S.W. Wyoming
|
| Posted: Wed Feb 18, 2004 4:39 pm Post subject: |
|
|
The little tab that clamps onto the rod was made in different lengths. If you can't get the shutter possitioned so the tab will actuate the release lever, you may need to find a different tab. Probably the long one which I understand is hard to find.
_________________
Glenn
"Wyoming - Where everybody is somebody else's weirdo" |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
