 |
Graflex.org Get help with your Graflex questions here |
| Stripped Focusing rails?? Goto page Previous 1, 2 | |
| Author | Message | ||
|---|---|---|---|
| Jim C. Joined: 18 Feb 2011 Posts: 89 |  Posted: Wed Mar 20, 2013 6:17 pm
No, I don't believe they'll fit, my guess is that the 3x4 arms will be shorter. | ||
| jharr Joined: 14 Mar 2013 Posts: 9 | Posted: Sun Mar 24, 2013 1:11 am Whatever you do, by no means take the slide locks out of the back! They must have had a special tool that compressed the spring and held it in place while they slid the slide lock in. It is impossible to do with out that tool. >:( | ||
| 45PSS Joined: 28 Sep 2001 Posts: 4081 | Posted: Sun Mar 24, 2013 4:05 am Does that mean you got the arm welded? or did you find a replacement arm? Part of the _ of owning a Graphic is you get creative and inventive when it comes to repair work.  | ||
| jharr Joined: 14 Mar 2013 Posts: 9 | Posted: Sun Mar 24, 2013 5:10 am I got the arm welded, but could not get it re-inserted into the back. I ordered another back from the auction site. Should be here mid-week. Then off to get some CLA/TLC along with a couple of semi-working shutters. I sure am going to enjoy this camera once it is 100%. | ||
| Jim C. Joined: 18 Feb 2011 Posts: 89 | Posted: Sun Mar 24, 2013 6:16 am
You didn't pay attention to my post about wrestling with that spring  When I got my Anniversary Graphic I thought about taking the back apart for a thorough cleaning, after examining the slide lock springs I decided against it. I may do in the future, but right now I have other Graflex diversions. | ||
| All times are GMT |